Lorex Vantage LNC116 Instruction Manual page 63

brightness settings.
Select Color or
Black & White
Select Sharpness
Select Lighting
Select Indoor
Lighting
Frequency
Flip camera
image
To configure general video settings:
1. Under Video Color, select Color or Black & White.
2. Under Sharpness, select the sharpness of the image between 10 (highest) and 1
(lowest).
3. Under Place, select Outdoor video if the area with the camera is brightly lit. Select
Indoor Video if you notice strip lines in the image or if the picture is too dark on the
Outdoor video setting. Select Indoor video + Sunlight if the picture is too bright on
the Indoor Video setting.
• If you select Indoor Video or Indoor Video + Sunlight, select 60Hz or 50Hz to adjust
the camera for the frequency of your indoor lighting.
4. Under Video Flip, select Video Flip to flip the camera image vertically and
horizontally or select Normal for normal orientation.
5. Under Brightness, select the brightness of the image between 10 (highest) and 1
(lowest).
6. Under Low Light Sensitivity, set the camera's sensitivity in low light environments
between Very High (highest), High, and Normal (lowest).
7. Check Enable time display on video to turn on video time stamps or uncheck it to
disable video time stamps.
8. Under Microphone, select Enabled to enable the built-in microphone on the camera
or select Disabled to disable the built-in microphone on the camera.
L-View 116 Software
Select Brightness
Select Low Light
Sensitivity
Enable/disable time
stamps
Enable/disable built-in
microphone
47