Configuring A Video Playing/Recording Schedule - Lorex Vantage LNC116 Instruction Manual

is detected. This is useful if you don't want to miss any events that occur, but want to
avoid recording and using up hard drive space when nothing is happening.
To enable motion triggered recording:
1. Right-click on the camera display area and click Motion Recording.
• The recording icon above the camera will turn green (
recording is enabled. It will turn yellow (
2. To disable motion triggered recording, right-click and click Motion Recording again.
NOTE: To view recordings, click
3.5 CONFIGURING A VIDEO PLAYING/RECORDING
SCHEDULE
You can configure a schedule for automatically displaying a camera on a specific display
screen or recording a camera to your computer hard drive.
You can configure the following schedule types:
• Play only: Display a camera on the selected display screen from a start date to an
end date.
• Continuous recording: Display a camera on the selected display screen and record
continuously from a start date to an end date.
• Periodic recording: Display a camera on the selected display screen and record on
a repeating schedule.
Schedules are managed by screens. Each screen can support 1 schedule, which records
Right-click and then click
Motion Recording to enable/
disable motion recording
) when motion recording is active.
to open L-Play. See "L-Play" on page 56.
L-View 116 Software
) to show that motion
37