Video; Display - Lorex Vantage LNC116 Instruction Manual

Configuring Camera Settings using a Web Browser
To configure WiFi Settings:
NOTE: For instructions on connecting your camera to a WiFi network, see "WiFi Setup"
on page 18.
1. Perform one of the following:
• To Scan available WiFi networks, click WiFi Scan.
• To connect to a hidden WiFi network, select Enable Wifi function, and manually fill
out the SSID, Security mode (i.e. encryption type), and the WEP or WPA-PSK Key.
Click Save & Apply. Refresh the page and select WiFi test. When the test is
successful, disconnect the camera from Ethernet.
• To configure a fixed IP address for the camera when connected over WiFi, click IP
address, configure the settings as needed, and click Save & Apply.
• To test configured WiFi settings, click WiFi test.

8.3 VIDEO

Configure camera video and streaming settings. Watch live video from the camera
(Internet Explorer only).

8.3.1 DISPLAY

Watch live video from the camera (only compatible with Internet Explorer).
You must install ActiveX controls to view live video using Internet Explorer. An
136
Configure WiFi
IP address
Test WiFi
configuration
Scan WiFi
networks