Night Mode - Lorex Vantage LNC116 Instruction Manual

Configuring Camera Settings using a Web Browser
network than when connecting using broadband Internet.
To configure mobile streaming settings:
1. Under Mobile bandwidth, select your available mobile bandwidth. If you are primarily
connecting using WiFi, you may set this setting higher.
2. Select either Select resolution & frame rate automatically to have the camera
automatically select the resolution and frame rate based on available bandwidth or
select Use the following values to manually select the resolution and frame rate.
3. Under Resolution, select the resolution that will be used when connecting to the
camera using a smart phone or tablet: VGA (640x480) or QVGA (320x240).
4. Under Frame rate, select the frame rate that will be used when connecting to the
camera using a smart phone or tablet between 30fps (highest) and 1fps (lowest).
5. Select Enable audio to enable audio streaming to smart phones and tablets or
Disable audio to disable audio streaming to smart phones and tablets.
6. Click Save & Apply to apply changes to your camera.

8.3.4 NIGHT MODE

Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
140