Configuring Night Mode Control - Lorex Vantage LNC116 Instruction Manual

Wireless network camera
Hide thumbs Also See for Vantage LNC116:
Table of Contents

Advertisement

3.3.5 CONFIGURING NIGHT MODE CONTROL

Configure when the camera uses day or night mode. When day mode is on, the camera
sees in color. When night mode is on, the camera sees in black and white, and the
Infrared LED turns on to enable night vision.
To configure night mode settings:
1. Right-click on the camera you want to configure and select Night mode control.
2. Select one of the following:
• Automatic day and night mode switch: Camera will automatically switch between
day mode or night mode, based on the amount of light in the room.
• Scheduled time of night mode: Camera will switch between day mode and night
mode at a scheduled times each day. If using this option, use the first set of drop-down
menus to select (in 24-hour time) what time the camera will switch to night mode
and the second set of drop-down menus to select when the camera will return to
day mode.
Start of night
mode
(8:00 PM)
Return to day
mode
(6:00 AM)
L-View 116 Software
35

Advertisement

Table of Contents
loading

Table of Contents