Sd Card (Configuring Microsd Recording) - Lorex Vantage LNC116 Instruction Manual

Configuring Camera Settings using a Web Browser
to scare off intruders.
To configure speaker alarms:
1. Under Speaker Alarm Trigger, select one of the following alarm triggers:
• Motion: Use Video motion detection to trigger audio alarms. Video motion detection
looks for movement in the image to determine if there is motion. This means that
there may be false alarms caused by changes in lighting, trees moving in the wind,
etc.
• PIR: Use the PIR motion detector to trigger audio alarms. The PIR motion detector
uses changes in temperatures (e.g. from a person moving around in front of the
camera) to determine if there is motion. PIR motion detection is less effective at
higher temperatures.
NOTE: You may also select both PIR and Motion to receive alarms from both motion
triggers.
• Schedule: Create audio alarms based on the settings set in the Scheduling page.
See "Scheduling (Configuring Recording and Alarm Schedules)" on page 148.
• Disable: Disable audio alarms.
2. Under Alarm loop times, select the number of times the alarm will repeat.
3. Click Alarm Test to sound a test alarm.
4. Click Save & Apply.

8.4.3 SD CARD (CONFIGURING MICROSD RECORDING)

Configure video recording to the microSD card (required; not included). To playback
144
Select Audio Alarm
Triggers
Select the Alarm
loop times