Editing Camera Mobile Streaming Settings - Lorex Vantage LNC116 Instruction Manual

5. Under Sound, select ON to enable Push Alarm Notifications when sound is detected
by the camera or OFF to disable. Under Sound Sensitivity, select a sensitivity for
Sound Push Alarm Notifications between 1 (lowest) and 10 (highest).
6. Tap Update to save your settings.

6.4.4 EDITING CAMERA MOBILE STREAMING SETTINGS

Configure the camera image quality settings for streaming to mobile devices (i.e. smart
phones and tablets). Please note that less bandwidth is generally available over mobile
networks than over WiFi or Ethernet.
To edit mobile streaming settings:
1. In Camera List, tap
2. Tap Stream Settings.
3. Under Bandwidth, select the bandwidth for your mobile connection. If you are mainly
connecting using WiFi, you may set this setting higher.
4. Under Auto, select ON to have the camera automatically select the resolution and
frame rate based on available bandwidth. Or, select OFF to manually select the
resolution and frame rate. If you select OFF, configure the following:
• Under Resolution, select the resolution that will be used when connecting to the
camera using a smart phone or tablet: 320x240 (QVGA) or 640x480 (VGA). Tap Done
to confirm.
next to the camera.
Select Mobile Bandwidth
Enable/disable auto resolution and
frame rate adjustment
Select Resolution
Select Frame rate
Enable/disable audio streaming to
iPad
iPad App
97