Displaying Information About Syslog Features; Nortel Ethernet Routing Switch 8300 Series; Routine Maintenance; Nn46200-514 03.01 Standard - Nortel 8300 Series Maintenance Manual

78 Routine software maintenance
[<info|warning|error|fatal>]
[<info|warning|error|fatal>] [<info|warning|error|fatal>]
ERS-8310:6/config/sys/syslog/host/1# create
ERS-8310:6/config/sys/syslog/host/1# address
10.143.163.200
ERS-8310:6/config/sys/syslog/host/1# facility ?
set unix system syslog host facility
Required parameters:
<facility> = facility to log on syslog host
{local0|local1|local2|local3|local4|local5|local6|lo-
cal7}
Command syntax:
facility <facility>
ERS-8310:6/config/sys/syslog/host/1# facility local6
ERS-8310:6/config/sys/syslog/host/1# host ?
Not enough required parameters entered
enable/disable syslog host
Required parameters:
<enable|disable> = operation {disable|enable}
Command syntax:
host <enable|disable>
ERS-8310:6/config/sys/syslog/host/1# host enable
ERS-8310:6/config/sys/syslog/host/1# info
Sub-Context:
Current Context:
ERS-8310:6/config/sys/syslog/host/1#

Displaying information about syslog features

To display information about the syslog features enabled on the switch,
use the following command:
Copyright © 2004-2007, Nortel Networks
.
mapwarning <level>
maperror <level>
mapfatal <level>
severity <info|warning|error|fatal>
udp-port <port>
facility : local6
mapwarning : warning
maperror : error
mapfatal : emergency
udp-port : 514

Nortel Ethernet Routing Switch 8300 Series

Routine Maintenance

NN46200-514 03.01 Standard

4.0 27 August 2007
address : 10.143.163.200
create : 1
delete : N/A
host : enable
mapinfo : info
severity : info|warning|error|fatal