Figure 17 Trap Log Dialog Box; Figure 18 Syslog Dialog Box; Nortel Ethernet Routing Switch 8300 Series; Routine Maintenance - Nortel 8300 Series Maintenance Manual

Hide thumbs Also See for 8300 Series:

Table of Contents

Figure 17

Trap Log dialog box

When you operate Device Manager from a UNIX platform, you must be

logged on as a root to receive traps.

On a Windows platform, only the ﬁrst DM application can open a trap log.

On a UNIX platform, only the root user can open a trap log.

By default, traps are sent in SNMP V2c format. However, if you use an older

network management system (NMS) that supports only SNMP V1 traps (HP

OpenView), you can indicate that the traps be sent in V1 format.

Using the Syslog

To view the system log:

•

The SysLog dialog box appears. See

71).

Figure 18

SysLog dialog box

Using the log

To view the log:

•

From the Device Manager menu bar, choose Device > SysLog.

From the Device Manager menu bar, choose Device > Log.

4.0 27 August 2007

Checking logs for errors 71

Figure 18 "SysLog dialog box" (page

Table of Contents