Nortel 8300 Series Maintenance Manual page 31

To install an Nortel Ethernet Routing Switch 8300 Series module:
Step
1
2
3
4
5
6
Copyright © 2004-2007, Nortel Networks
.
Removing modules and cleaning slots and the backplane 31
CAUTION
Electrostatic discharge can damage hardware. Review the
antistatic precautions on
Action
Locate the slot where you want to install the module.
Remove the installed module or the filler panel.
For instructions, see
Make sure that the insert/extract levers are extended away from
the front of the module (see
8006, 8010, 8306, and 8310 Chassis" (page
Slide the module into the slot using the slot module guides
a module: 8006, 8010, 8306, and 8310 Chassis" (page
Installing a module: 8006, 8010, 8306, and 8310 Chassis
Slide the module into the chassis until its connector panel touches
the chassis back panel.
Rotate the insert/extract levers to seat the module backplane
connectors ("Seating the backplane connectors: 8006, 8010, 8306,
and 8310 Chassis" (page
Nortel Ethernet Routing Switch 8300 Series
Routine Maintenance
NN46200-514 03.01 Standard
4.0 27 August 2007
"Static concerns" (page
"Removing a module" (page
"Ejecting the module from the chassis:
32)).
26).
28).
29)).
("Installing
31)).