54 Routine software maintenance
Step
1
2
3
4
5
6
7
8
Copyright © 2004-2007, Nortel Networks
.
Action
To ensure that DHCP functionality is enabled on the switch, select IP
Routing > DHCP from the menu. In the screen that is presented,
confirm that the entry has the Enabled field selected.
Select the port or ports you want to graph.
If you want to select multiple ports, press [Ctrl] and hold down the
key while you click the ports you want to configure. A yellow outline
appears around the selected ports.
From the Device Manager main menu, select Graph > Port
The Port dialog box for a single port or for multiple ports appears
with the Interface tab visible. See
tab" (page
48).
From the Device Manager bar, choose Graph > Port.
The Graph Port dialog box appears with the Interface tab displayed.
Click the DHCP tab.
The DHCP tab appears. See
(page
54).
GraphPort dialog box - DHCP tab
Select the statistic(s) you want to graph.
In the Poll Interval box, select the polling interval.
Click the Graph button (bar, pie, chart, line).
Nortel Ethernet Routing Switch 8300 Series
Routine Maintenance
NN46200-514 03.01 Standard
4.0 27 August 2007
"Graph Port dialog box - Interface
"GraphPort dialog box - DHCP tab"
—End—