Phone Displaying "Connecting - Nortel Contivity 110 Application Notes

Press Program soft key it will redirect to Craft Code Screen
Give Craft Code and it will redirect to Craft Procedures Screen here select VPN and press Start soft key
Press forward soft key on the phone and it will go to IKE Phase 2 Screen, here check the IKE Phase 2 Screen
Settings is correct or not.
6.3

Phone displaying "connecting..."

This issue can be resolved by the administrators who have access to the Avaya Communication manager and
Nortel VPN Gateway. Open the web interface of the Nortel VPN gateway. Check the entered routes are correct.
Check that the phone requests are able to reach the ACM and also phone gets response from the ACM (Trace
using any sniffing software e.g. Ethereal/wireshark). Open up the 46xxsettings.txt file and enter "SET VPNTTS
0". Reboot the phone with the correct file server IP address.
_________________________________________________________________________
_____________________________________________________________________________________
www.support.avaya.com,
Avaya Inc. – Proprietary. Use pursuant to Company Instructions.
_____________________________________________________________________________________
Invalid configuration
Restart Program
Enter Code:
# = OK
Page: 23
Back
11/4/2009