Specify the
mode to
apply a
QoS profile
Follow these steps to apply a QoS profile manually:
Enter system view
Apply a QoS
profile to
specific
ports
Displaying and Maintaining QoS Profile Configuration
To do...
Display QoS profile
configuration
To do...
Configure the
mode to apply a
QoS profile as
port-based
Configure the
mode to apply a
QoS profile as
user-based
To do...
In system view
Enter
Ethernet port
view
In Ethernet
port view
Apply a QoS
profile to the
current port
Use the command...
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
Use the command...
qos-profile
port-based
undo qos-profile
port-based
Use the command...
system-view
apply qos-profile
profile-name interface
interface-list
interface interface-type
interface-number
apply qos-profile
profile-name
2-4
Remarks
Optional
By default, the mode to
apply a QoS profile is
user-based.
If
the
authentication mode is
MAC address-based, the
mode to apply a QoS
profile
must
configured user-based.
If
the
authentication mode is
port-based, the mode to
apply a QoS profile must
be
configured
port-based.
Remarks
—
Select either
of the
operations.
By default, a
port has no
QoS profile
applied to it.
Remarks
Available in any view
802.1x
be
802.1x
as