Ftp Test - 3Com 5500-EI PWR Install Manual

remote-ping entry(admin administrator, tag dhcp) test result:
Send operation times: 10
Min/Max/Average Round Trip Time: 1018/1037/1023
Square-Sum of Round Trip Time: 10465630
Last complete test time: 2000-4-3 9:51:30.9
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-remote-ping-administrator-dhcp] display remote-ping history administrator dhcp
remote-ping entry(admin administrator, tag dhcp) history record:
Index Response
1
2
3
4
5
6
7
8
9
10
For detailed output description, see the corresponding command manual.
You can perform a remote-ping DHCP test only when no DHCP client is enabled on any interface.
Otherwise, the DHCP Server sends the response to an interface enabled with the DHCP Client rather
than to the source interface, thus resulting in remote-ping DHCP test failure.

FTP Test

Network requirements
Both the remote-ping client and the FTP server are switches. Perform a remote-ping FTP test between
the two switches to test the connectivity to the specified FTP server and the time required to upload a
file to the server after the connection is established. Both the username and password used to log in to
the FTP server are admin. The file to be uploaded to the server is cmdtree.txt.
Status LastRC
1018 1
1037 1
1024 1
1027 1
1018 1
1020 1
1018 1
1020 1
1020 1
1028 1
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Time
0 2000-04-03 09:51:30.9
0 2000-04-03 09:51:22.9
0 2000-04-03 09:51:18.9
0 2000-04-03 09:51:06.8
0 2000-04-03 09:51:00.8
0 2000-04-03 09:50:52.8
0 2000-04-03 09:50:48.8
0 2000-04-03 09:50:36.8
0 2000-04-03 09:50:30.8
0 2000-04-03 09:50:22.8
1-25