3Com 5500-EI PWR Install Manual page 1015

[Sysname-remote-ping-administrator-udpprivate] test-type udpprivate
# Configure the IP address of the remote-ping server as 10.2.2.2.
[Sysname-remote-ping-administrator-udpprivate] destination-ip 10.2.2.2
# Configure the destination port on the remote-ping server.
[Sysname-remote-ping-administrator-udpprivate] destination-port 8000
# Configure to make 10 probes per test.
[Sysname-remote-ping-administrator-udpprivate] count 10
# Set the probe timeout time to 5 seconds.
[Sysname-remote-ping-administrator-udpprivate] timeout 5
# Start the test.
[Sysname-remote-ping-administrator-udpprivate] test-enable
# Display test results.
[Sysname-remote-ping-administrator-udpprivate] display remote-ping results administrator
udpprivate
remote-ping entry(admin administrator, tag udpprivate) test result:
Destination ip address:10.2.2.2
Send operation times: 10
Min/Max/Average Round Trip Time: 10/12/10
Square-Sum of Round Trip Time: 1170
Last complete test time: 2000-4-2 8:29:45.5
Extend result:
SD Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0
System busy operation number: 0
Operation sequence errors: 0
Other operation errors: 0
[Sysname-remote-ping-administrator-udpprivate] display remote-ping history administrator
udpprivate
remote-ping entry(admin administrator, tag udpprivate) history record:
Index Response
1 11
2 12
3 11
4 11
5 11
6 11
7 10
8 10
9 10
10 11
For detailed output description, see the corresponding command manual.
Receive response times: 10
DS Maximal delay: 0
Operation timeout number: 0
Connection fail number: 0
Drop operation number: 0
Status LastRC
1 0
1 0
1 0
1 0
1 0
1 0
1 0
1 0
1 0
1 0
1-36
Time
2000-04-02 08:29:45.5
2000-04-02 08:29:45.4
2000-04-02 08:29:45.4
2000-04-02 08:29:45.4
2000-04-02 08:29:45.4
2000-04-02 08:29:45.4
2000-04-02 08:29:45.3
2000-04-02 08:29:45.3
2000-04-02 08:29:45.3
2000-04-02 08:29:45.3