When Switch Acts As Client For Publickey Authentication - 3Com 5500-EI PWR Install Manual

[SwitchA] ssh2 10.165.87.136
Username: client001
Trying 10.165.87.136 ...
Press CTRL+K to abort
Connected to 10.165.87.136 ...
The Server is not authenticated. Do you continue to access it?(Y/N):y
Do you want to save the server's public key?(Y/N):n
Enter password:
**************************************************************************
* Copyright(c) 2004-2008 3Com Corp. and its licensors. All rights reserved.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
**************************************************************************
<SwitchB>

When Switch Acts as Client for Publickey Authentication

Network requirements
As shown in Figure
(SSH Server) for secure data exchange. The user name is client001 and the SSH server's IP address is
10.165.87.136. Publickey authentication is required.
Network diagram
Figure 1-31 Switch acts as client for publickey authentication
Configuration procedure
In public key authentication, you can use either RSA or DSA public key. Here takes the DSA public key
as an example.
Configure Switch B
1-31, establish an SSH connection between Switch A (SSH Client) and Switch B
1-47
*
*