Configuring The Ssh Server To Be Compatible With Ssh1 Clients; Configuring Key Pairs - 3Com 5500-EI PWR Install Manual

Set the SSH authentication
timeout time
Set the number of SSH
authentication retry attempts
Set the RSA server key update
interval
Configure a login header
Specify a source IP address for
the SSH server
Specify a source interface for
the SSH server
You can configure a login header only when the service type is stelnet. For configuration of
service types, refer to
For details of the header command, refer to the corresponding section in Login Command.

Configuring the SSH Server to Be Compatible with SSH1 Clients

Follow these steps to configure the SSH server to be compatible with SSH1 clients:
To do...
Enter system view
Configure the SSH server to be
compatible with SSH1 clients

Configuring Key Pairs

The SSH server's key pairs are for generating session keys and for SSH clients to authenticate the
server. The SSH client's key pairs are for the SSH server to authenticate the SSH clients in publickey
authentication mode. Both RSA and DSA key pairs are supported.
ssh server timeout seconds
ssh server
authentication-retries times
ssh server rekey-interval
hours
header shell text
ssh-server source-ip
ip-address
ssh-server source-interface
interface-type
interface-number
Specifying a Service Type for an SSH
Use the command...
system-view
ssh server
compatible-ssh1x enable
1-8
Optional
By default, the SSH
authentication timeout time is 60
seconds.
Optional
By default, the number of SSH
authentication retry attempts is 3.
Optional
By default, the system does not
update the RSA server keys.
Optional
By default, no login header is
configured.
Optional
By default, no source IP address
is configured.
Optional
By default, no source interface is
configured.
User.
Remarks
—
Optional
By default, the SSH server is
compatible with SSH1 clients.