Enabling Layer 3 Error Control
Follow these steps to enable Layer 3 error control:
To do...
Enter system view
Enable Layer 3 error control
Displaying and Maintaining System Guard Configuration
To do...
Display the monitoring result
and parameter settings of
System Guard against IP
attacks
Display the information about
IP packets received by the CPU
Display the status of Layer 3
error control
Display the status of TCN
Use the command...
system-view
system-guard l3err enable
Use the command...
display system-guard ip
state
display system-guard
ip-record
display system-guard l3err
state
display system-guard tcn
state
4-3
Remarks
—
Required
Enabled by default
Remarks
Available in any view