Examples For Upper-Layer Software Referencing Acls; Example For Controlling Telnet Login Users By Source Ip; Example For Controlling Web Login Users By Source Ip - 3Com 5500-EI PWR Install Manual

To do...
Display information about
packet filtering
Display information about
ACL resources

Examples for Upper-layer Software Referencing ACLs

Example for Controlling Telnet Login Users by Source IP

Network requirements
Apply an ACL to permit users with the source IP address of 10.110.100.52 to telnet to the
switch.
Network diagram
Figure 1-1 Network diagram for controlling Telnet login users by source IP
Internet
Switch
Configuration procedure
# Define ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] rule 1 permit source 10.110.100.52 0
[Sysname-acl-basic-2000] quit
# Reference ACL 2000 on VTY user interface to control Telnet login users.
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] acl 2000 inbound

Example for Controlling Web Login Users by Source IP

Network requirements
Apply an ACL to permit Web users with the source IP address of 10.110.100.46 to log in to
the switch through HTTP.
display packet-filter { interface
interface-type interface-number |
unitid unit-id }
display drv qacl_resource
PC
10.110.100.52
Use the command...
1-13
Remarks