3Com 5500-EI PWR Install Manual page 540

Configuration procedure
Configure Switch A.
# Configure VLAN 3.
<LSW-A> system-view
[LSW-A] vlan 3
[LSW-A-vlan3] port Ethernet1/0/10
[LSW-A-vlan3] quit
[LSW-A] interface Vlan-interface 3
[LSW-A-Vlan-interface3] ip address 10.100.10.2 255.255.255.0
[LSW-A-Vlan-interface3] quit
# Configure VLAN 2.
[LSW-A] vlan 2
[LSW-A-vlan2] port Ethernet 1/0/6
[LSW-A-vlan2] quit
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] ip address 202.38.160.1 255.255.255.0
[LSW-A-Vlan-interface2] quit
# Configure that the virtual router can be pinged.
[LSW-A] vrrp ping-enable
# Create a VRRP group.
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] vrrp vrid 1 virtual-ip 202.38.160.111
# Set the priority for the VRRP group.
[LSW-A-Vlan-interface2] vrrp vrid 1 priority 110
# Set the authentication type for the VRRP group to md5, and the password to abc123.
[LSW-A-Vlan-interface2] vrrp vrid 1 authentication-mode md5 abc123
# Configure the master to send VRRP packets every 5 seconds.
[LSW-A-Vlan-interface2] vrrp vrid 1 timer advertise 5
# Set the tracked VLAN interface.
[LSW-A-Vlan-interface2] vrrp vrid 1 track interface Vlan-interface 3 reduced 30
Configure switch B.
# Configure VLAN 3.
<LSW-B> system-view
[LSW-B] vlan 3
[LSW-B-vlan3] port Ethernet1/0/10
[LSW-B-vlan3] quit
[LSW-B] interface Vlan-interface 3
[LSW-B-Vlan-interface3] ip address 10.100.10.3 255.255.255.0
[LSW-B-Vlan-interface3] quit
# Configure VLAN 2.
[LSW-B] vlan 2
[LSW-B-vlan2] port Ethernet 1/0/5
1-13