Advanced > Management > Snmp > Snmpv1/V2C - Kyocera FS-2100DN User Manual

Settings Pages
Advanced > Management > SNMP > SNMPv1/v2c
6-42
APOP = On, the Login Password is encrypted, and cannot be read. APOP
requires that the POP3 server supports APOP, and has APOP enabled.
POP3 Security
Enables or disables POP3 Security. When this protocol is enabled, either
SSL/TLS or STARTTLS must be selected. To enable POP3 security, the
POP3 port may have to be changed according to the server settings.
Typically, 465 for SSL/TLS and 25 or 587 for STARTTLS are well-known
SMTP ports.
Test
This will test one transmission for each press, attempting to establish
communication with the POP3 server.
Delete e-mail after retrieval
Enables or disables the Delete E-mail after retrieval function. When this item
is set to On, the retrieved E-mail is deleted from the POP3 server. When this
item is set to Off, the E-mail will not be deleted after retrieved from the POP3
server.
E-mail size limit
Enter maximum E-mail size in Kilobytes. When the value is 0, the limitation
for E-mail size is disabled.
Cover Page
Specifies whether to print the body of an E-mail in addition to the attached
files. When this item is set to On, the attached files and the body of an E-mail
are printed. When no attached files exist, only the body of an E-mail is
printed. When this item is set to Off, only the attached files are printed. When
no attached files exist, nothing is printed.
The SNMP protocol is used for providing and transferring management
information within the network environment. Should an error occur such as Add
Paper, the printing system automatically generates a trap, an error message
sent to predetermined trap recipients.
The community names are used like passwords.
SNMPv1/v2c
Sets whether to use the SNMPv1/v2c protocol. Set On to use it. After you
have changed the setting, you must restart the printing system.
Read Community
Enter the community name for SNMP requests to read a value. The default
name is 'public'. After you have changed the setting, you must restart the
printing system.
Write Community
Enter the community name for SNMP requests to write (change) a value.
The default name is 'public'. After you have changed the setting, you must
restart the printing system.
sysContact
The MIB-II sysContact object. Usually this is the E-mail address of the
network administrator.
sysName
The MIB-II sysName object. Usually this is the host or domain name of the
printing system.
User Guide