About Login; Levels Of Login - Kyocera FS-2100DN User Manual

Levels of Login

COMMAND CENTER RX

3 About Login

This section provides information to help the administrator manage domain and
local users. The administrator can set authentication that allows the predefined
users to access the embedded server pages and set administrator passwords.
An administrator can configure the device to require a user login before it is
accessed, in either of three different ways of authentication as described in this
section.
If you select local or network authentication, User Login must be turned on.
The default user name and password, or the local administrator account when
User Login is turned off, is Admin. Note that the embedded web server does not
provide administrative limitation against the access to itself.
Local Authentication
Users are registered in this device and one-to-one authentication is
performed between this printing system and a PC. A local account user
accesses the embedded server by entering a User Name and Password
and selecting Local in the drop-down list (if shown) below the entries,
followed by clicking the Login button.
A user logged in with administrator privileges can gain access to My
Information, Device Information, Job Status, Document Box, Address
Book, Settings and Links on the navigation menu.
A user logged in with a general user account cannot add or delete document
boxes, nor view the Address Book and Settings pages.
To add, delete or configure a locally authenticated user, refer to
Security > User Login
Network Authentication
If the device is configured for network authentication, the device and the
relevant PC's need to be under the management of a Windows domain
network. Enter a User Name and Password and select the domain you want
to login to in the drop-down list.
Once you have logged in with administrator privileges, you can access to My
Information, Device Information, Job Status, Document Box, Address
Book, Settings and Links on the navigation menu.
A user logged in with a general user account cannot add or delete document
boxes, nor view the Address Book and Settings pages.
To add, delete or configure a network authenticated user, refer to
> Management > Authentication > General
Authentication Using Job Account ID
If the device is configured for job accounting but not for User Login, a user
can be authenticated by his/her job account ID. Enter the job account ID in
Account Login and click Login.
on page 6-10.
on page 6-45.
Basic >
Advanced
3-1