Advanced > Management > Authentication > Group Authorization Set; Advanced > Management > Ic-Card Settings - Kyocera FS-2100DN User Manual

Advanced > Management > Authentication > Group Authorization
Set.
Adding a New Group
1
2
3
Editing a Group
1
2
3
Deleting a Group
1
2
3
4
Advanced > Management > IC-Card Settings
COMMAND CENTER RX
Once the network authentication has been established, you can add a group to
specify the Group Information and items for Job Authorization Settings.
LDAP must be enabled in order to activate group authorization.
Up to 20 group accounts are registerable. By default, a group account (Other)
has been preset. This is used to process any group account which does not fall
within the registered groups.
Group Authorization
Turned On if you want to individually authorize or deauthorize the groups.
Number of Registered Groups
The number of the groups currently registered.
Click Group Authorization Set., open the Group Authorization Set. page.
Click Add and specify group information and Off or Reject Usage.
Click Submit.
Click Group Authorization Set., open the Group Authorization Set page.
Click the desired Group ID or Group Name to edit the group and modify their
information.
Click Submit.
Click Group Authorization Set., open the Group Authorization Set. page.
Check the desired group. When the check box on the left side of Group ID is
selected, all groups displayed on the page will be checked.
Click Delete. The Group Authorization Set.-Delete page appears. You can
confirm the groups to delete.
Click Delete when the desired groups are selected.
This feature is available when an optional IC card reader is installed with the
printing system. This enables reading an IC card (FeliCa®) to login the printing
system.
IC Card Read Type
Selects either IDM or FeliCa® type for the IC card to use.
System Code, Service Code, Number of User Blocks to Use
Settings Pages
6-47