Scanner > Ftp; Scanner > Smb - Kyocera FS-2100DN User Manual

Settings Pages
Scanner > FTP
Scanner > SMB
6-16
Specifies the resolution. The maximum resolution using full color or gray
scale mode is 300 x 300 dpi. To scan in full color or gray scale with 400 dpi
or 600 dpi resolution, expansion of the internal memory is required.
Original Image (Copy)
The original quality for copying is selected according to the type of original.
Select from Text+Photo (Printer Output), Text+Photo (Book/Magazine),
Photo (Printer Output), Photo (Book/Magazine), Photo (Photo Paper),
Text (Light Text/Fine Line), Graphic/Map (Printer Output), and
Graphic/Map (Book/Magazine).
Original Image (Send/Store)
The original quality for scanning/storing is selected according to the type of
original. Switch the original quality from Text, Text+Photo,and Photo.
File Format
Selects the file format in which the scanned data will be saved.
PDF/A
Turns PDF/A-compliant format PDF/A-1a or PDF/A-1b on or Off, when File
Format above is PDF. PDF/A is an electronic document file format for long-
term preservation as addressed in the ISO 19005-1 specification.
Image Quality (File Format)
Selects the file quality mode (1 [Low] to 5 [High]) in which the scanned data
will be saved.
High-Compression PDF Image
Selects the compression rate for PDF files from 1 (Low), 2 (Medium), and 3
(High).
High-Compression PDF Auto Color
Sets whether to enable or disable the automatic color/ monochrome
detection for the original to be scanned.
Zoom
Switches the zoom ratio between Auto and 100%. The default setting is
100%.
Original Orientation
Switches between Top Edge Top and Top Edge Left.
This section provides a summary of the items displayed on the FTP page.
FTP
Switches FTP On or Off.
FTP Port Number
Sets the FTP Port Number or use the FTP default port 21.
FTP Encrypted TX
This enables or disables Encryption for communication. When turned On,
the encryption algorithm that is selected by
Protocols on page 6-49 is used.
The table below provides a summary of the items displayed on the SMB page.
Advanced > Security > Secure
User Guide