Snmp - Kyocera TASKalfa 3051ci User Manual

6.

SNMP

SNMP Settings
1.
2.
User Guide
A Secure Communication Error Log History will be sent to a recipient once automat-
ically when clicking Send button.
Click Submit button.
This section includes advanced settings for SNMP.
If the settings for the item marked with an asterisk (*) has been changed, you must
restart the machine or the network. To restart the machine, proceed to the Reset page.
Click SNMP under Management Settings on the navigation menu. The SNMP
Settings page opens.
Configure SNMPv1/v2c as follows.
SNMPv1/v2c
Activate or deactivate the SNMPv1/v2c protocol. Select either On or Off in the Pro-
tocol Settings page under Network Settings. To configure SNMP v1/v2, proceed
as follows.
Read Community
Enter the community name for SNMP requests to read a value. The default name is
'public'. After you have changed the setting, you must restart the printing system.
Write Community
Enter the community name for SNMP requests to write (change) a value. The
default name is 'public'. After you have changed the setting, you must restart the
printing system.
sysContact
The MIB-II sysContact object. Usually this is the E-mail address of the network
administrator.
sysName
The MIB-II sysName object. Usually this is the host or domain name of the printing
system.
sysLocation
The MIB-II sysLocation object. Usually this is the location information of the printing
system which is described under Location of System Settings page. Go to the
System Settings page under Device Settings to modify the settings.
HP Web Jetadmin Compatibility
Turns HP Web Jetadmin Compatibility On or Off. After you have changed the set-
ting, you must restart the printing system.
Authentication Traps
Management Settings
81