Printer > System > Apl.filter (Japan Only); Printer > System > Apl.filter Parameters (Japan Only) - Kyocera FS-2100DN User Manual

Settings Pages
Printer > System > APL.Filter (Japan only)
Printer > System > APL.Filter Parameters (Japan only)
6-14
Paper Feed Mode
Determines the behavior of paper feed selection when the paper you
requested of size and/or type is not available in the current paper source.
Auto lets the machine to search for the matching paper including all the
paper sources. Fixed does not perform searching in the other paper
sources.
Duplex Mode
Selects the default duplex mode from Off, Long Edge and Short Edge.
Available on machines with the duplex printing.
Copies
Sets the number of copies to print.
Page Orientation
Switches Portrait or Landscape page orientation.
Gloss Mode
Sets Gloss Mode to On or Off. The default setting is Off. Available for some
color machines which support Gloss Mode.
Color Mode
Sets Color Mode to Black & White (Monochrome) or Full Color. Available
for some color machines.
KIR Mode
Switches KIR smoothing On or Off. Available for some machines.
EcoPrint Mode
Switches EcoPrint On or Off to control toner consumption for saving the
printing costs. The default setting is Off. Available for some machines.
Toner Save Level
Selects Toner Save Level from 1(Low) [low saving, darker printing] to
5(High) [high saving, lighter printing] when EcoPrint Mode is On.
This page allows you to configure the APL.Filter. The APL.Filter is a function
that converts the received print data to the specified code and prints that data.
Filter
Switches the APL.Filter On or Off.
Filter Name
Selects the APL.Filter. You can select the ASCII to KPDL conversion
process.
Configure items that can be set differently between APL.Filters. You can specify
fonts and the text to be converted.
Font
Specifies the fonts used for printing.
Start of String
Specifies the character string with which the text to be converted begins. Up
to 15 single-byte characters can be specified.
End of String
User Guide