Chapter 1 Introduction; System Requirements; Protocols; Web Browser - Kyocera FS-2100DN User Manual

System Requirements

Protocols

Web Browser

Accessing the Embedded Server

1
2
1-1
1 Introduction
Command Center RX (Remote eXtension), which will hereafter be referred to as
the embedded server, refers to the web server that is built into the printing
device. It allows you to verify the operating status of the device and make
settings related to security, network printing, E-mail transmission and advanced
networking.
With the embedded server, the administrator can remotely track paper and
toner usages per user and the status of optional equipment installed. The
embedded server also configures device settings, monitors jobs, and manages
document boxes and address books.
The embedded server operates in the following environment. Check the
following before use.
• The TCP/IP protocol is installed on the PC.
• An IP address is assigned to the printing system.
• Microsoft Internet Explorer 7.0 or later (Microsoft Internet Explorer operates
on Microsoft Windows XP/ Vista/7, and Microsoft Windows Server
2003/2008.)
• Mozilla Firefox 3.5 or later
• Safari 4.0 or later (Safari operates on Apple Mac OS X 10.4 or later.)
Access the embedded server by entering the printing system's host name or IP
address in a web browser. Obtain the IP address from your network
administrator.
Open a web browser.
Enter the device's host name or IP address as the URL. For example,
http://192.168.10.1.
The embedded server's home page will be accessed and displayed. The home
page requests a User name and Password. For initial login, use the predefined
Admin as the User Name, and Admin as the Password. This is set up internally.
For successive logins use any login name or password set up later in the
embedded server. Refer to
General on page 6-45.
Advanced > Management > Authentication >
User Guide