Advanced > E-Mail > Pop3 > General; Advanced > E-Mail > Pop3 > User - Kyocera FS-2100DN User Manual

Advanced > E-mail > POP3 > General
Advanced > E-mail > POP3 > User #
COMMAND CENTER RX
If a specified day does not exist in the month, such as the 31st, the last day
of the month is used as the specified day.
Run once now
You can test this by clicking the Send button to immediately send a report.
To use the E-mail function, you need to connect the printing system to an E-mail
server using the POP3 protocol.
POP3 Protocol
Enables or disables POP3 protocol.
Check Interval
Checks E-mails in the POP3 server at specific intervals. Specify the interval
in the range from 3 minutes to 60 minutes. The default is 15 minutes.
Run once now
Click the Receive button to immediately receive E-mail from the POP3
server.
Domain Restriction
Enter the domain names that can be permitted or rejected. You can also
specify the E-mail addresses.
This page allows you to set the POP3 user account and information on the
POP3 server. Up to three users can be set.
User Profile #
Enables or disables this user number.
E-mail Address
Enter the E-mail address.
POP3 Server Name
Enter the POP3 server name or IP address. If you use the host name, you
must first specify the DNS server information. For details, refer to
> Protocols > TCP/IP > General
POP3 Port Number
Set the POP3 Port Number, or use the POP3 default port number 110.
Choose the default port number 995 for POP3 connections over SSL.
POP3 Server Timeout
Enter the timeout in seconds during which this machine tries to connect to
the POP3 server.
Login User Name
Enter the login name of the user.
Login Password
Enter the password for connecting to the user name above.
Use APOP
Enables or disables APOP. APOP is an encryption mechanism used for
encrypting the Login Password during communication with the POP3 server.
When APOP = Off, the Login Password is sent using plain ASCII text. When
on page 6-32.
Settings Pages
Advanced
6-41