Fax / I-Fax > Fax > Transmit; Fax / I-Fax > Fax > Receive - Kyocera FS-2100DN User Manual

Kyocera command center rx user guide rev-1.60
Hide thumbs Also See for FS-2100DN:
Table of Contents

Advertisement

FAX / i-FAX > FAX > Transmit
FAX / i-FAX > FAX > Receive
COMMAND CENTER RX
because, if the setting is incorrect, dialing will be impossible. The choices are
Tone (DTMF) or Pulse (10pps), or Pulse (20pps).
Local FAX ID
Specifies your FAX system ID.
Speaker Volume
Sets the volume of the internal speaker that allows you to listen to the other
party or to verify the conditions on the telephone line when the [On-Hook]
key was pressed. The choices are Off and levels 1 through 5.
Monitor Volume
Sets the volume of the internal speaker that allows you to verify the FAX
tones during FAX communication. The choices are Off and levels 1 through
5.
The table below provides a summary of the items displayed on the Transmit
page.
TTI
Selects On or Off whether to send the TTI (Transmit Terminal Identifier)
information to another party.
TTI Position
Selects the position of the TTI to be printed on the transmitted documents.
TX Start Speed
Selects the speed rate at starting transmission from 33600bps, 14400bps,
and 9600bps. Once communiation is established, the speed rate that is
slower than the other is employed.
ECM TX
Turns error correction mode on, which corrects errors that may happen
during communication. To use error correction, error correction mode must
be turned on at both parties.
The table below provides a summary of the items displayed on the Receive
page.
FAX Receive
Selects the FAX reception mode. The choices are Auto (Normal, FAX/TEL,
TAD or DRD) or Manual. (The selectable option is different depending on
the destination.)
DRD Pattern
Selects the DRD pattern. This menu is available only for specific
destinations.
Number Display
Displays the caller's phone number if the service has been contracted.
(Available only in Japan.)
RX Start Speed
Selects the speed rate at starting reception from 33600 bps, 14400 bps, and
9600 bps. Once communication is established, the speed rate which is
slower than the other is employed.
Settings Pages
6-27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents