Checking Printer Status Through E-Mail (Epson Aculaser Mx14Nf Only) - Epson AcuLaser MX14 User Manual

If the Status Monitor icon is not displayed on the taskbar, open Status Monitor from the start menu.
The following procedure uses Microsoft
1. Click start — All Programs — EPSON — your printer — Activate Status Monitor.
The Printer Selection window appears.
2. Click the name of the desired printer from the list.
The Printer Status window appears.
For details about the functions of Status Monitor, refer to the Help of Status Monitor.
See Also:
"Status Monitor (Windows Only)" on page 34

Checking Printer Status Through E-mail (Epson AcuLaser MX14NF Only)

When connected in a network environment where sending and receiving of e-mail is possible, the
printer can send an e-mail report to specified e-mail addresses containing the following information:
❏ The error status which has occurred on the printer
Setting the E-mail Environment
Activate EpsonNet Config. On the Properties tab, configure the following settings according to your
e-mail environment. After configuring the settings on each screen, always click Apply and then turn
off/on the printer to reboot. For details about each item, refer to the Help for EpsonNet Config.
Item
General Setup —
StatusMessenger
Port Status
®
Windows
Item To Be Configured
Recipient's E-mail Address
Notification Items
StatusMessenger
Epson AcuLaser MX14 Series
®
XP as an example.
Description
Set the e-mail address to which notices about changes in
printer status or errors are sent.
Set the contents of the notices to send in the e-mail.
Select Enabled.
User's Guide
Maintenance 312