Clearing Paper Jams From The Center Output Tray - Epson AcuLaser MX14 User Manual

5. Close the rear cover.
If the error is not resolved, there may be a piece of paper remaining inside the printer. Use the
following procedure to clear the jam.
6. Load a print media on the MFP or PSI if there is no print media.
7. Press the (Clear All) button on the operator panel for 3 seconds.
The print media is fed to push out the jammed paper.

Clearing Paper Jams From the Center Output Tray

Important:
❏ To prevent electric shock, always turn off the printer and disconnect the power cord from the
grounded outlet before performing maintenance.
❏ To avoid burns, do not clear paper jams immediately after printing. The fusing unit becomes
extremely hot during use.
Note:
To resolve the error displayed on the LCD panel, you must clear all print media from the print media
path.
Epson AcuLaser MX14 Series
Troubleshooting
User's Guide
263