Epson AcuLaser MX14 User Manual page 237

Values:
Off
On*
Gray Balance
Purpose:
To specify the default gray balance level within the range of -2 to +2. The factory default menu setting
is 0.
Multiple Up
Purpose:
To print two original pages to fit onto one sheet of paper.
Values:
Off*
Auto
ID Card Copy
Manual
Margin Top/Bottom
Purpose:
To specify the value of the top and bottom margins.
Values:
4 mm*/0.2 inch*
0-50 mm/0.0-2.0 inch
Margin Left/Right
Purpose:
To specify the value of the left and right margins.
Does not suppress the background.
Suppresses the background of the original to enhance text on the copy.
Does not perform Multiple Up printing.
Automatically reduces the original pages to fit onto one sheet of paper.
Prints the original pages onto one sheet of paper in the original size.
Prints the original pages onto the one sheet of paper in the size specified in
Reduce/Enlarge.
Specify the value in increments of 1 mm/0.1 inch.
Using the Operator Panel Menus and Keypad
Epson AcuLaser MX14 Series User's Guide
237