Epson AcuLaser MX14 User Manual page 288

Error Code What You Can Do
005-121 Open the ADF cover. Remove the jammed paper and then close the ADF cover.
See Also:
"Clearing Paper Jams From the ADF (Epson AcuLaser MX14NF)" on page 256
005-301 Close the ADF cover.
010-397 Turn off the printer, and then on. If this does not solve the problem, contact the Epson local
representative office or an authorised dealer.
016-315
See Also:
"Contacting Epson Support" on page 318
016-317
016-372
016-501
016-502
016-503 Press the
server administrator.
016-504 Press the
correctly by contacting your server administrator.
016-506 Press the
correctly.
016-507 Press the
are set correctly by contacting your server administrator.
016-718 Press the
016-719 Press the
016-720
016-744 Press the
representative office or an authorised dealer.
016-745
See Also:
"Contacting Epson Support" on page 318
016-749 Press the
016-764 Press the
not solve the problem, contact SMTP server administrator.
016-766 Press the
available. If this does not solve the problem, contact SMTP server administrator.
016-767 Press the
button to clear the message. Check if the SMTP server setting is correct by contacting your
button to clear the message. Check if the user name and password for the POP3 server are set
button to clear the message. Check if the SMTP server address and e-mail destination are set
button to clear the message. Check if the user name and password used for the SMTP server
button to clear the message. Retry when the printer does not process any job.
button to cancel the current job. Retry when the printer does not process any job.
button to clear the message. If this does not solve the problem, contact the Epson local
button to cancel the current job. Retry when the printer does not process any job.
button to clear the message. Check if the Ethernet cable is properly connected. If this does
button to clear the message. Ping the IP address of the SMTP server and check if the server is
button to clear the message. Check if the recipient address is correct, and try scanning again.
Epson AcuLaser MX14 Series
Troubleshooting
User's Guide
288