Collated - Epson AcuLaser MX14 User Manual

4. If necessary, customize the copy settings including the copy size, and image quality.
See Also:
"Setting Copy Options" on page 119
5. Press the (Start) button to begin copying.

Collated

You can sort the copy output: For example, if you make two copies of three page documents, one
complete three page document will print followed by the second complete document.
Note:
Copying documents with a large amount of data may exhaust available memory. If a memory shortage
occurs, cancel the collating by turning Collated to Off on the operator panel.
1. For the Epson AcuLaser MX14NF, load the document(s) face up with top edge in first into the
ADF or place a single document face down on the document glass, and close the document cover.
For the Epson AcuLaser MX14, place a single document face down on the document glass, and
close the document cover.
See Also:
❏ "Making Copies From the ADF (Epson AcuLaser MX14NF Only)" on page 118
❏ "Making Copies From the Document Glass" on page 116
2. Press the (Copy) button.
3. Select Collated, and then press the
4. Select the desired setting, and then press the
Note:
Value marked by an asterisk (*) is the factory default menu settings.
Epson AcuLaser MX14 Series
button.
button.
User's Guide
Copying 120