Epson AcuLaser MX14 User Manual page 110

❏ A phrase or word to describe a setting
❏ A numerical value that can be changed
❏ An On or Off setting
Note:
Press the and
4. Select the desired value.
5. Press the button to enable the setting value.
The value is indicated by a highlight in the previous screen to identify it as the current user default
menu setting.
6. To continue setting other items, select the desired menu. Press the
to the previous menu.
To quit setting new values, press the System button, and then press the
return to the Select Function screen.
These settings are active until new ones are selected or the factory defaults are restored.
Driver settings may have precedence over changes previously made. In such case, change the defaults
of the operator panel.
Using the Printer Setting Utility to Change the Printer Settings
You can select menu items and corresponding values from the Printer Setting Utility.
The following procedure uses Windows XP as an example.
Note:
Factory defaults may vary for different countries.
These settings are active until new ones are selected or the factory defaults are restored.
To select a new value as a setting:
1. Click start — All Programs — EPSON — your printer — Printer Setting Utility.
button at the same time. This will display the factory default menu settings.
Epson AcuLaser MX14 Series
(Back) or button to return
(Back) or
Printing Basics
User's Guide
button to
110