Epson AcuLaser MX14 User Manual page 266

7. Lower the levers to their original position.
8. Close the rear cover.
If the error is not resolved, there may be a piece of paper remaining inside the printer. Use the
following procedure to clear the jam.
9. Load a print media on the MFP or PSI if there is no print media.
10. Press the (Clear All) button on the operator panel for 3 seconds.
The print media is fed to push out the jammed paper.
Epson AcuLaser MX14 Series
Troubleshooting
User's Guide
266