Epson AcuLaser MX14 User Manual page 71

❏ Pasted-up or glued paper
❏ Specially coated paper
❏ Color paper with surface treatments
❏ Paper that uses ink that deteriorates with heat
❏ Photosensitive paper
❏ Carbon paper or carbonless copy paper
❏ Paper with a rough surface, such as Japanese paper, pulp paper or fibrous paper
❏ Envelopes that are not flat, or that have clasps, windows or adhesives with release strips
❏ Padded envelopes
❏ Tack film
❏ Water transfer paper
❏ Textile transfer paper
❏ Perforated paper
❏ Leather paper, embossed paper
❏ Conductive paper such as origami paper, carbonic paper or conductively-coated paper
❏ Wrinkled, creased, folded, or ripped paper
❏ Damp or wet paper
❏ Wavy or curled paper
❏ Paper with staples, clips, ribbons, or tape
❏ Label paper with some labels already peeled off, or that are partially cut off
❏ Paper pre-printed by another printer or copier
❏ Paper pre-printed all over rear side
Warning:
w
Do not use conductive paper such as origami paper, carbonic paper or conductively-coated paper.
When paper jam occurs, it may cause short-circuit and eventually a fire accident.
Epson AcuLaser MX14 Series
Printing Basics
User's Guide
71