Epson AcuLaser MX14 User Manual page 93

Loading Print Media in the Priority Sheet Inserter (PSI)
1. First print the even pages (rear sides).
For a six page document, rear sides are printed in order of page 6, page 4, and then page 2.
The Data LED blinks and the Insert Output to Tray message appears on the LCD panel when
the even pages finish printing.
2. After the even pages are printed, remove the paper stack from the center output tray.
Note:
Warped or curled prints can cause paper jams. Straighten them before setting them.
3. Stack the prints and set them as they are (with the blank side facing up) into the PSI, and then press
the button.
Epson AcuLaser MX14 Series
Printing Basics
User's Guide
93