Setting The Time For The Power Saver Mode; Resetting To Factory Defaults - Epson AcuLaser MX14 User Manual

❏ Locked
❏ Password Locked

Setting the Time for the Power Saver Mode

You can set the Power Saving Timer for the printer. The printer switches to the Power Saver mode
after the specified time.
1. Press the System button.
2. Select Admin Menu, and then press the
3. Select System Settings, and then press the
4. Select Power Saving Timer, and then press the
5. Select Low Power Timer or Sleep Timer, and then press the
6. Press the or
button.
You can select from 1-30 minutes for Low Power Timer or 6-11 minutes for Sleep Timer.
7. To return to the previous screen, press the

Resetting to Factory Defaults

After executing Initialize NVM and rebooting the printer, the menu parameters or data are reset to
their factory default values.
Note:
The following procedure does not initialize the network settings.
❏ For the Epson AcuLaser MX14NF, to initialize the network settings, refer to "Initialize NVM" on
page 212.
1. Press the System button.
2. Select Admin Menu, and then press the
button or enter the desired value using the numeric keypad, and then press the
Epson AcuLaser MX14 Series
button.
button.
button.
(Back) button.
button.
Using the Operator Panel Menus and Keypad
User's Guide
button.
250