Epson AcuLaser MX14 User Manual page 229

Initialize NVM
Purpose:
To initialize NVM for system parameters, Address Book data for fax, or Address Book data for e-mail.
After executing this function and rebooting the printer, the menu parameters or data, except the
parameters for the network, are reset to their factory default values. (Address Book is available only on
the Epson AcuLaser MX14NF.)
See Also:
"Resetting to Factory Defaults" on page 250
Values:
Epson AcuLaser MX14NF:
User Fax Section
System Section
Epson AcuLaser MX14:
System Section
Non-Genuine Mode
Purpose:
To use toner cartridge of another manufacturer.
Note:
❏ Using non-genuine toner cartridges may make some printer features unusable, reduce print quality
and decrease the reliability of your printer. Epson recommends only new Epson brand toner
cartridges for your printer. Epson does not provide warranty coverage for problems caused by using
consumables not supplied by Epson.
❏ Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Yes Initializes the fax number entries in the Address Book.
No* Does not initialize the fax number entries in the Address Book.
Yes Initializes the system parameters.
No* Does not initialize the system parameters.
Initializes the system parameters.
Yes
Does not initialize the system parameters.
No*
Epson AcuLaser MX14 Series
Using the Operator Panel Menus and Keypad
User's Guide
229