Automatic Redialing; Sending A Delayed Fax - Epson AcuLaser MX14 User Manual

You can set your printer to print a confirmation report automatically after each fax transmission.
See Also:
❏ "Fax Transmit" on page 220
❏ "Fax Broadcast" on page 221

Automatic Redialing

If the number you have dialed is busy or there is no answer when you send a fax, the printer will
automatically redial the number every minute based on the number set in the redial settings.
To change the time interval between redials and the number of redial attempts, see "Redial Delay" on
page 215 and "Number of Redial" on page 215.
Note:
The printer will not automatically redial a number that was busy when the number was manually
entered.

Sending a Delayed Fax

The Delayed Start mode can be used to save scanned documents for transmission at a specified time to
take advantage of lower long distance rates.
1. Load the document(s) face up with top edge in first into the ADF or place a single document face
down on the document glass and close the document cover.
See Also:
❏ "Loading an Original Document on the ADF" on page 176
❏ "Loading an Original Document on the Document Glass" on page 177
2. Press the (Fax) button.
3. Adjust the document resolution to suit your fax needs.
See Also:
❏ "Resolution" on page 178
❏ "Lighten/Darken" on page 179
Epson AcuLaser MX14 Series
Faxing (Epson AcuLaser MX14NF Only)
User's Guide
183