Managing The Printer; Checking Or Managing The Printer With Epsonnet Config; Checking Printer Status With Status Monitor (Windows Only) - Epson AcuLaser C2900N User Manual

Managing the Printer

Checking or Managing the Printer with EpsonNet Config

When the printer is installed in a TCP/IP environment, you can use EpsonNet Config to check the
printer status, the remaining volume of consumables, and the paper loaded in this printer. You can
also use EpsonNet Config to configure printer settings.
Note:
When using the printer as a local printer, you cannot use EpsonNet Config. For details about checking
the status of a local printer, refer to "Checking Printer Status with Status Monitor (Windows Only)" on
page 224.
Starting EpsonNet Config
Use the following procedure to start EpsonNet Config.
1. Launch your web browser.
2. Enter the IP address in the browser's Address field, and then press the Enter key.
The EpsonNet Config screen appears.
Using Online Help
For details about each item, refer to the Help on the Software Disc.

Checking Printer Status with Status Monitor (Windows Only)

Status Monitor is a tool that is installed with your Epson print driver. It automatically checks the
printer status when you send a print job. Status Monitor can check the paper size loaded into the tray,
the status of the output tray, and the remaining amount of consumables, such as toner cartridges.
Starting Status Monitor
Double-click the Status Monitor icon on the taskbar or right-click the icon and select Select
Printer.
If the Status Monitor icon is not displayed on the taskbar, open Status Monitor from the Start menu:
Epson AcuLaser C2900 Series
Maintenance
User's Guide
224