Automatic Redialing; Sending A Delayed Fax - Epson AcuLaser CX29NF User Manual

If something goes wrong while sending your fax, an error message appears on the LCD panel.
If you receive an error message, press the
again.
You can set your printer to print a confirmation report automatically after each fax transmission.
See Also:
"Printing a Report Page" on page 225

Automatic Redialing

If the number you have dialed is busy or there is no answer when you send a fax, the printer will
automatically redial the number every minute based on the number set in the redial settings.
To change the time interval between redials and the number of redial attempts, see "Available Fax
Settings Options" on page 220.
Note:
The printer will not automatically redial a number that was busy when the number was manually
entered.

Sending a Delayed Fax

The Delayed Start mode can be used to save scanned documents for transmission at a specified time to
take advantage of lower long distance rates.
1. Load the document(s) face up with top edge in first into the ADF.
OR
Place a single document face down on the document glass, and close the document cover.
See Also:
❏ "Loading an Original Document on the ADF" on page 194
❏ "Loading an Original Document on the Document Glass" on page 195
2. Press the Fax button.
Epson AcuLaser CX29 Series
button to clear the message and try to send the document
User's Guide
Faxing 201