Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 318

10. Appendix
Creating and Installing the Self-Signed Certificate
Create and install the server certificate using Web Image Monitor. This section explains the use of a self-
certificate as the server certificate.
1. Log on to Web Image Monitor in the administrator mode.
2. In the left area, click [Configuration], and then click [Device Certificate] in "Security".
The [Device Certificate] page appears.
3. Click [Create].
4. Make the necessary settings.
5. Click [OK].
The setting is changed.
6. Click [OK].
A security warning dialog box appears.
7. Check the details, and then click [OK].
[Installed] appears under [Certificate Status] to show that a server certificate for the printer has been
installed.
8. Quite Web Image Monitor.
• Click [Delete] to delete the server certificate from the printer.
• For details about the displayed items and selectable items, see Web Image Monitor Help.
Creating the Server Certificate (Certificate Issued by a Certificate Authority)
10
Create the server certificate using Web Image Monitor. This section explains the use of a certificate issued
by a certificate authority as the server certificate.
1. Log on to Web Image Monitor in the administrator mode.
2. In the left area, click [Configuration], and then click [Device Certificate] in "Security".
The [Device Certificate] page appears.
3. Click [Request].
4. Make the necessary settings.
5. Click [OK].
[Requesting] appears for [Certificate Status] in the [Device Certificate] area.
6. Quite Web Image Monitor.
316