Setting The Ssl / Tls Encryption Mode; Snmpv3 Encryption - Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual

Setting the SSL / TLS Encryption Mode

By specifying the SSL/TLS encrypted communication mode, you can change the security level.
Encrypted Communication Mode
Using the encrypted communication mode, you can specify encrypted communication.
Ciphertext Only
Ciphertext Priority
Ciphertext/Clear Text
Setting the SSL / TLS Encryption Mode
This can be specified by the administrator.
After installing the server certificate, specify the SSL/TLS encrypted communication mode. By making this
setting, you can change the security level. Specify the SSL/TLS encrypted communication mode using Web
Image Monitor.
1. Log on to Web Image Monitor in the administrator mode.
2. Click [Configuration].
3. Click [SSL/TLS] in "Security".
4. Select the encryption communication mode in the [Permit SSL/TLS Communication] list, and
then click [OK].
Select [Ciphertext Only], [Ciphertext Priority], or [Ciphertext/Clear Text] as the encrypted
communication mode.
5. Quit Web Image Monitor.

SNMPv3 Encryption

This can be specified by the administrator.
Allows encrypted communication only.
If encryption is not possible, the printer does not
communicate.
Performs encrypted communication if encryption
is possible.
If encryption is not possible, the printer
communicates without it.
Communicates with or without encryption,
according to the setting.
Protection Using Encryption
319
10