Wiconfig - Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual

6. Monitoring and Configuring the Printer
• Specify "1" or "2" for x as the corresponding number to the URL.
Link name configuration
You can enter the name for URL that appears on Web Image Monitor.
msh> web name "Name you want to display"
• Specify "1" or "2" for x as the corresponding number to the link name.
Resetting URL names registered as link destinations
msh> web x clear name
• Specify "1" or "2" for x as the number corresponding to the link name.
Help URL Configuration
You can set URLs linked by clicking [Help] or [?] on Web Image Monitor.
msh> web help http://"Help URL or IP address"/help/
Deleting Help URL
msh> web clear help
6

wiconfig

Use the "wiconfig" command to make settings for IEEE 802.11b.
View settings
msh> wiconfig
View IEEE 802.11b settings
msh> wiconfig cardinfo
• If IEEE 802.11b is not working correctly, its information is not displayed.
Configuration
msh> wiconfig "parameter"
mode {ap|adhoc|802.11adhoc}
ssid "ID value"
224
Parameter Value configured
You can set the infrastructure mode (ap) , the
802.11 ad hoc mode (802.11adhoc), or the ad
hoc mode (adhoc).
The default is ad hoc mode.
You can make settings for the SSID in the
infrastructure mode.
Usable characters are ASCII 0x20-0x7e (32
bytes).