Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 253

Message
exiting
Exit pserver
Frametype =<frame typename>
httpd start.
IEEE 802.11b <communication mode> mode
inetd start.
Interface (interface name): Duplicate IP Address (IP
address).
< Interface > started with IP: < IP address >
< Interface >: Subnet overlap.
IPP cancel-job: permission denied.
IPP job canceled. jobid=%d.
LeaseTime=<lease time>(sec),
RenewTime=<renewtime>(sec).
Login to fileserver <file server name> (<IPX|IPv4|
IPv6>,<NDS|BINDERY>)
Memory allocate error.
Problem and solutions
The lpd service has ended and the system is exiting
the process.
(In the print server mode) The print server function
is disabled because the necessary print server
settings have not been made.
The frame type name is configured to be used on
NetWare.
The httpd service has started.
Displays IEEE 802.11b communication mode.
The inetd service has started.
The same IP (IPv4 or IPv6) address was used. Each
IP address must be unique. Check the address of
the device indicated in [IP address].
IP address (IPv4, or IPv4 address) has been set for
the interface and is operating.
The same IP address (IPv4, or IPv6 address) and
the subnet mask is used with other device.
The printer could not authenticate the name of the
user attempting to cancel a job.
The spooled job was canceled due to error or user
request.
The resource lease time received from the DHCP
server is displayed in [lease time] in seconds. The
renewal time is displayed in [renew time] in
seconds.
(In the print server mode) Login to the file server is
in the NDS or BINDERY mode.
Data cannot be obtained.
Disconnect the USB cable, and then connect it.
Message List
6
251