Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 255

Message
sap enable, saptype=<SAP type>, sapname=<SAP
name>
server identity invalid
session IPv4 <community name> not defined.
session IPv6 <community name> not defined.
session <community name> already defined.
session_ipx <community name> not defined.
Set context to <NDS contextname>
smbd start. (NETBIOS)
SMTPC: failed to get smtp server ip-address.
SMTPC: failed to connect smtp server. timeout.
SMTPC: refused connect by smtp server.
Problem and solutions
The SAP function has started. The SAP packet is
issued to advertise the service on the SAP table on
the NetWare server.
The server ID is disabled. Check the server
authentication.
The requested community name is not defined.
The requested community name is not defined.
The requested community name is not defined.
The requested community name is not defined.
An NDS context name has been set.
The smbd service has started.
The SMTP server IP address could not be obtained.
This could be because:
• The specified DNS server could not be found.
• No connection to the network has been
established.
• The specified DNS server could not be found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address could
not be found in the DNS server.
Connection to the SMTP server failed due to
timeout. This could be because the specified SMTP
server name is incorrect, or no connection to the
network has been established, or the network
configuration is incorrect, so there is no response
from the SMTP server. Check the SMTP server
name, or the network connection and
configuration.
Connection to the SMTP server is denied. This could
be because server other than the SMTP server has
been specified, or the specified SMTP server port
Message List
6
253