Ricoh SP4100N - Aficio SP B/W Laser Printer Software Manual page 231

• Use the "secondary" command to configure a secondary WINS server IPv4 address.
• Do not use "255.255.255.255" as the IPv4 address.
NBT (NetBIOS over TCP/IP) Scope ID Selection
You can specify the NBT scope ID.
msh> wins "interface_name" scope "scope ID"
• The scope ID can be entered using up to 31 alphanumeric characters.
• Be sure to specify the interface.
• wlan can be specified only when the IEEE 802.11b interface unit is installed.
ether
wlan
Interface name
Remote Maintenance by telnet
Interface configured
Ethernet interface
IEEE 802.11b interface
6
229