5. Making Printer Settings Using the Control Panel
Maintenance Menu
You can set printing conditions such as density and calibration, and printer management such as formatting
the optional hard disk unit.
Changing the Maintenance Menu
This section explains changing the Maintenance menu using examples.
HD Format
Follow the procedure below to set HD Format.
1.
Press the [Menu] key.
5
The [Menu] screen appears.
2.
Press the [ ] or [ ] key to display [Maintenance], and then press the [
3.
Press the [ ] or [ ] key to display [HD Format], and then press the [
4.
Read the HD format confirmation message, and then press the [
The hard disk unit is formatted, and the message appears.
5.
Press the [
The [HD Format] screen appears.
6.
Press the [Online] key.
The initial screen appears.
• "Attaching Hard Disk Drive Type 2650", Hardware Guide.
Maintenance Menu Parameters
This section explains about parameters that can be set on the Maintenance menu.
Image Density
You can select the print image density.
-3 to 3
• "Adjusting the Image Density", Hardware Guide.
146
Enter] key.
Enter] key.
Enter] key.
Enter] key.